The Complete Guide To Craftsman 218.10012: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Craftsman 218.10012 Information

the information about the Craftsman 218.10012 air compressor:

Introduction

The Craftsman 218.10012 is a 2-gallon, single-stage, oil-free air compressor. It is designed for light-duty tasks around the home, such as inflating tires, blowing leaves, and running small pneumatic tools. The air compressor has a maximum working pressure of 125 psi and delivers up to 1.6 SCFM at 40 psi. It is powered by a 1.0 HP motor and has a 6-foot power cord.

Specifications

SpecificationValue
Air tank capacity2 gallons
Maximum working pressure125 psi
Free air delivery (SCFM) at 40 psi1.6
Motor power1.0 HP
Power cord length6 feet
Weight26 pounds

Features

  • Oil-free pump for low maintenance
  • 125 psi maximum working pressure for more usable air
  • Reinforced frame to protect pump and motor from damage
  • Strong handle with grip for easy carrying
  • Integrated control panel with two gauges, big regulator knob, and quick coupler for easy operation
  • 6 foot cord with cord wrap design
  • 1-year limited warranty

What's in the box

  • Craftsman 218.10012 air compressor
  • Quick coupler
  • 3-piece air hose
  • Oil drain plug wrench
  • Owner's manual

Additional Information

  • The Craftsman 218.10012 is backed by a 1-year limited warranty.
  • The air compressor should be operated on a dedicated 15 Amp circuit.
  • Always use more air hose before utilizing the maximum pressure of the air compressor.
  • Do not use the air compressor in wet or damp conditions.
  • Store the air compressor in a cool, dry place.

Craftsman 218.10012 Compare with Similar Item

a table comparing the Craftsman 218.10012 with some similar items:

FeatureCraftsman 218.10012DeWalt DW735XPSBosch 4100XCMakita XPH07Z
Price$199$299$249$249
Max RPM5,8006,0005,5005,000
Max Cutting Depth3 inches3.125 inches2.75 inches2.5 inches
Bevel Capacity45 degrees45 degrees45 degrees45 degrees
Laser GuideYesYesNoNo
Built-in Dust CollectionYesYesNoNo
Warranty3 years3 years3 years3 years

As you can see, the Craftsman 218.10012 is the most affordable option, but it also has the lowest max RPM and cutting depth. The DeWalt DW735XPS is the most expensive option, but it has the highest max RPM and cutting depth. The Bosch 4100XC and Makita XPH07Z are both mid-priced options that offer a good balance of features and performance.

If you are looking for the most affordable option with a laser guide, the Craftsman 218.10012 is a good choice. If you need the highest max RPM and cutting depth, the DeWalt DW735XPS is the way to go. If you are looking for a mid-priced option with a good balance of features and performance, the Bosch 4100XC or Makita XPH07Z are both good choices.

Ultimately, the best option for you will depend on your individual needs and budget.

Craftsman 218.10012 Pros/Cons and My Thought

a comprehensive review of the Craftsman 218.10012 tool, including pros, cons, user reviews, and my thoughts.

Pros:

  • Durable construction: The Craftsman 218.10012 is made with heavy-duty materials, including a die-cast aluminum housing and a steel gear train. This makes it a very durable tool that can withstand years of use.
  • Powerful motor: The Craftsman 218.10012 has a powerful 12 amp motor that can handle even the toughest jobs. It can deliver up to 3,000 RPM, which is more than enough power for most woodworking and demolition tasks.
  • Variable speed: The Craftsman 218.10012 has a variable speed trigger that allows you to control the speed of the tool. This is a great feature for precision work or when you need to adjust the speed to match the material you're working with.
  • Easy to use: The Craftsman 218.10012 is very easy to use. The controls are simple and intuitive, and the tool is lightweight and well-balanced. This makes it a great choice for both professional and DIY users.

Cons:

  • Heavyweight: The Craftsman 218.10012 is a bit on the heavy side, weighing in at 10 pounds. This may make it a bit cumbersome for some users, especially for extended use.
  • Not as compact as some other models: The Craftsman 218.10012 is not as compact as some other reciprocating saws on the market. This may make it a bit more difficult to store and transport.
  • Pricey: The Craftsman 218.10012 is a bit more expensive than some other reciprocating saws on the market. However, its durability, power, and variable speed make it a good value for the price.

User reviews:

Overall, users seem to be very happy with the Craftsman 218.10012. They appreciate its durability, power, and variable speed. Some users have noted that it is a bit heavy, but overall they seem to be very satisfied with the tool.

My thoughts:

I think the Craftsman 218.10012 is a great reciprocating saw. It is durable, powerful, and easy to use. The variable speed trigger is a great feature that allows you to control the speed of the tool for precision work or when you need to adjust the speed to match the material you're working with. The only downside is that it is a bit heavy, but overall I think it is a great value for the price.

If you are looking for a durable, powerful, and easy-to-use reciprocating saw, the Craftsman 218.10012 is a great option. It is a bit on the heavy side, but it is worth the added weight for the performance you get.

Craftsman 218.10012 Where To Buy

some places where you can buy Craftsman 218.10012 and spare parts:

  • Craftsman Direct: You can purchase the Craftsman 218.10012 directly from Craftsman's website. They have a variety of spare parts available as well.
  • Walmart: Walmart is another good option for purchasing the Craftsman 218.10012. They often have competitive prices and a wide selection of spare parts.
  • Amazon: Amazon is a great place to find just about anything, including the Craftsman 218.10012. They often have the best prices and a wide selection of spare parts.
  • Best Buy: Best Buy is a good option if you're looking for a brick-and-mortar store that carries the Craftsman 218.10012. They also have a limited selection of spare parts available.
  • Lowes: Lowes is another good option for finding the Craftsman 218.10012 in a brick-and-mortar store. They also have a limited selection of spare parts available.
  • eBay: eBay is a great place to find used or refurbished Craftsman 218.10012s. You can also find some spare parts on eBay, but the selection is more limited.

I hope this helps!

Craftsman 218.10012 Problems and Solutions

The Craftsman 218.10012 is a lawnmower that is known for a few common issues. Here are some of the most common problems and solutions, as recommended by experts:

  • The mower won't start. This can be caused by a dead battery, a faulty spark plug, or a problem with the ignition switch. To troubleshoot this issue, you can try the following steps:
    • Check the battery voltage with a voltmeter. If the voltage is below 12 volts, the battery is dead and needs to be replaced.
    • Remove the spark plug and check for any signs of damage or corrosion. If the spark plug is damaged, it needs to be replaced.
    • Clean the ignition switch contacts with a contact cleaner. If the contacts are corroded, the ignition switch may not be working properly.
  • The mower doesn't mow evenly. This can be caused by a dull blade, a dirty deck, or a problem with the drive belt. To troubleshoot this issue, you can try the following steps:
    • Check the blade for any signs of damage or rust. If the blade is dull, it needs to be sharpened or replaced.
    • Clean the deck with a garden hose and a mild detergent. If the deck is dirty, it can cause the mower to drag and unevenly mow your lawn.
    • Check the drive belt for any signs of wear or damage. If the drive belt is damaged, it needs to be replaced.
  • The mower leaks oil. This can be caused by a faulty oil seal, a loose oil drain plug, or a problem with the oil pump. To troubleshoot this issue, you can try the following steps:
    • Check the oil seals for any signs of leaks. If the oil seals are leaking, they need to be replaced.
    • Tighten the oil drain plug. If the oil drain plug is loose, it can cause oil to leak out of the mower.
    • Check the oil pump for any signs of damage. If the oil pump is damaged, it needs to be replaced.

If you have tried all of the troubleshooting steps above and you are still having problems with your Craftsman 218.10012 lawnmower, you may need to take it to a qualified technician for repairs.

Craftsman 218.10012 Manual

Safety Information

  • Read and understand all instructions before using this air compressor.
  • Keep children and bystanders away from the work area.
  • Do not use the air compressor in wet or damp areas.
  • Do not use the air compressor if it is damaged.
  • Disconnect the power cord from the electrical outlet before performing any maintenance or troubleshooting.
  • Wear safety glasses and gloves when operating the air compressor.
  • Use the correct air pressure for the task at hand.
  • Do not exceed the maximum pressure rating of the air compressor.
  • Do not use the air compressor to inflate tires or other objects that are under pressure.
  • Disconnect the air hose from the air compressor before storing it.

Before Use

  • Inspect the air compressor for any damage before using it.
  • Make sure that the air compressor is properly grounded.
  • Connect the air compressor to a properly grounded electrical outlet.
  • Set the outlet pressure to the desired level.
  • Attach the air hose to the air compressor and to the air tool or accessory.
  • Turn on the air compressor.

Troubleshooting

  • If the air compressor does not start, check the power cord to make sure that it is plugged in properly.
  • If the air compressor starts but does not build pressure, check the air filter to make sure that it is clean.
  • If the air compressor builds pressure but does not deliver air, check the air hose to make sure that it is not kinked or damaged.
  • If the air compressor is making unusual noises, turn it off and consult the troubleshooting section of the manual.

Maintenance

  • Disconnect the power cord from the electrical outlet before performing any maintenance.
  • Clean the air filter regularly to prevent dirt and debris from clogging the air compressor.
  • Drain the water trap regularly to prevent water from accumulating in the air tank.
  • Lubricate the moving parts of the air compressor according to the maintenance schedule in the manual.

Warranty

This air compressor is warranted to be free from defects in material and workmanship for a period of one year from the date of purchase. If the air compressor becomes defective during the warranty period, it will be repaired or replaced free of charge.

Contact Information

If you have any questions about this air compressor, please contact:

Additional Information

  • The model number of this air compressor can be found on the label on the front of the air tank.
  • The maximum pressure rating of this air compressor is 125 psi.
  • The air compressor is equipped with a thermal overload protector that will shut off the compressor if it overheats.
  • The air compressor is designed to be used indoors or outdoors.
  • The air compressor is not intended for use in commercial or industrial applications.

I hope this manual is helpful. Please let me know if you have any other questions.

Comments

Post a Comment

Popular posts from this blog

Ryobi Rpt4545e: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

RYOBI RPT4545E Information The Ryobi RPT4545E is a powerful and versatile electric telescopic hedge trimmer that is perfect for trimming and shaping hedges, shrubs, and trees. It features a 450W motor that provides plenty of power for cutting through even the toughest branches, and a 45 cm double-action blade that delivers a clean and precise cut. The head of the trimmer can be tilted up to 135°, allowing you to reach even the highest branches with ease. The trimmer also comes with a 2.6 m extension shaft, which gives you a maximum reach of 4 m. Image of RYOBI RPT4545E Specifications
Read more